|
Error |
|
Message |
|
|
|
|
600 |
|
An operation is
pending. |
| 601 |
|
The port handle is
invalid. |
| 602 |
|
The port is already
open. |
| 603 |
|
Caller's buffer is too
small. |
| 604 |
|
Wrong information
specified. |
| 605 |
|
Cannot set port
information. |
| 606 |
|
The port is not
connected. |
| 607 |
|
The event is invalid. |
| 608 |
|
The device does not
exist. |
| 609 |
|
The device type does
not exist. |
| 610 |
|
The buffer is invalid. |
| 611 |
|
The route is not
available. |
| 612 |
|
The route is not
allocated. |
| 613 |
|
Invalid compression
specified. |
| 614 |
|
Out of buffers. |
| 615 |
|
The port was not
found. |
| 616 |
|
An asynchronous
request is pending. |
| 617 |
|
The port or device is
already disconnecting. |
| 618 |
|
The port is not open. |
| 619 |
|
The port is
disconnected. |
| 620 |
|
There are no
endpoints. |
| 621 |
|
Cannot open the phone
book file. |
| 622 |
|
Cannot load the phone
book file. |
| 623 |
|
Cannot find the phone
book entry. |
| 624 |
|
Cannot write the phone
book file. |
| 625 |
|
Invalid information
found in the phone book. |
| 626 |
|
Cannot load a string. |
| 627 |
|
Cannot find key. |
| 628 |
|
The port was
disconnected. |
| 629 |
|
The port was
disconnected by the remote machine. |
| 630 |
|
The port was
disconnected due to hardware failure. |
| 631 |
|
The port was
disconnected by the user. |
| 632 |
|
The structure size is
incorrect. |
| 633 |
|
The port is already in
use or is not configured for Remote Access dialout. |
| 634 |
|
Cannot register your
computer on the remote network. |
| 635 |
|
Unknown error. |
| 636 |
|
The wrong device is
attached to the port. |
| 637 |
|
The string could not
be converted. |
| 638 |
|
The request has timed
out. |
| 639 |
|
No asynchronous net
available. |
| 640 |
|
A NetBIOS error has
occurred. |
| 641 |
|
The server cannot
allocate NetBIOS resources needed to support the client. |
| 642 |
|
One of your NetBIOS
names is already registered on the remote network. |
| 643 |
|
A network adapter at
the server failed. |
| 644 |
|
You will not receive
network message popups. |
| 645 |
|
Internal
authentication error. |
| 646 |
|
The account is not
permitted to log on at this time of day. |
| 647 |
|
The account is
disabled. |
| 648 |
|
The password has
expired. |
| 649 |
|
The account does not
have Remote Access permission. |
| 650 |
|
The Remote Access
server is not responding. |
| 651 |
|
Your modem (or other
connecting device) has reported an error. |
| 652 |
|
Unrecognized response
from the device. |
| 653 |
|
A macro required by
the device was not found in the device .INF file section. |
| 654 |
|
A command or response
in the device .INF file section refers to an undefined macro |
| 655 |
|
The <message>
macro was not found in the device .INF file section. |
| 656 |
|
The <defaultoff>
macro in the device .INF file section contains an undefined
macro |
| 657 |
|
The device .INF file
could not be opened. |
| 658 |
|
The device name in the
device .INF or media .INI file is too long. |
| 659 |
|
The media .INI file
refers to an unknown device name. |
| 660 |
|
The device .INF file
contains no responses for the command. |
| 661 |
|
The device .INF file
is missing a command. |
| 662 |
|
Attempted to set a
macro not listed in device .INF file section. |
| 663 |
|
The media .INI file
refers to an unknown device type. |
| 664 |
|
Cannot allocate
memory. |
| 665 |
|
The port is not
configured for Remote Access. |
| 666 |
|
Your modem (or other
connecting device) is not functioning.
The Device is not ready |
| 667 |
|
Cannot read the media
.INI file. |
| 668 |
|
The connection
dropped. |
| 669 |
|
The usage parameter in
the media .INI file is invalid. |
| 670 |
|
Cannot read the
section name from the media .INI file. |
| 671 |
|
Cannot read the device
type from the media .INI file. |
| 672 |
|
Cannot read the device
name from the media .INI file. |
| 673 |
|
Cannot read the usage
from the media .INI file. |
| 674 |
|
Cannot read the
maximum connection BPS rate from the media .INI file. |
| 675 |
|
Cannot read the
maximum carrier BPS rate from the media .INI file. |
| 676 |
|
The line is busy. |
| 677 |
|
A person answered
instead of a modem. |
| 678 |
|
There is no answer.
The Computer That You Are Dialing Does Not Answer |
| 679 |
|
Cannot detect carrier. |
| 680 |
|
There is no dial tone. |
| 681 |
|
General error reported
by device. |
| 682 |
|
ERROR WRITING
SECTIONNAME |
| 683 |
|
ERROR WRITING
DEVICETYPE |
| 684 |
|
ERROR WRITING
DEVICENAME |
| 685 |
|
ERROR WRITING
MAXCONNECTBPS |
| 686 |
|
ERROR WRITING
MAXCARRIERBPS |
| 687 |
|
ERROR WRITING USAGE |
| 688 |
|
ERROR WRITING
DEFAULTOFF |
| 689 |
|
ERROR READING
DEFAULTOFF |
| 690 |
|
ERROR EMPTY INI FILE |
| 691 |
|
Access denied because
username and/or password is invalid on the domain. |
| 692 |
|
Hardware failure in
port or attached device. |
| 693 |
|
ERROR NOT BINARY MACRO |
| 694 |
|
ERROR DCB NOT FOUND |
| 695 |
|
ERROR STATE MACHINES
NOT STARTED |
| 696 |
|
ERROR STATE MACHINES
ALREADY STARTED |
| 697 |
|
ERROR PARTIAL RESPONSE
LOOPING |
| 698 |
|
A response keyname in
the device .INF file is not in the expected format. |
| 699 |
|
The device response
caused buffer overflow. |
| 700 |
|
The expanded command
in the device .INF file is too long. |
| 701 |
|
The device moved to a
BPS rate not supported by the COM driver. |
| 702 |
|
Device response
received when none expected. |
| 703 |
|
ERROR INTERACTIVE MODE |
| 704 |
|
ERROR BAD CALLBACK
NUMBER |
| 705 |
|
ERROR INVALID AUTH
STATE |
| 706 |
|
ERROR WRITING INITBPS |
| 707 |
|
X.25 diagnostic
indication. |
| 708 |
|
The account has
expired. |
| 709 |
|
Error changing
password on domain. |
| 710 |
|
Serial overrun errors
were detected while communicating with your modem. |
| 711 |
|
RasMan initialization
failure. Check the event log. |
| 712 |
|
Biplex port is
initializing. Wait a few seconds and redial. |
| 713 |
|
No active ISDN lines
are available. |
| 714 |
|
Not enough ISDN
channels are available to make the call. |
| 715 |
|
Too many errors
occurred because of poor phone line quality. |
| 716 |
|
The Remote Access IP
configuration is unusable. |
| 717 |
|
No IP addresses are
available in the static pool of Remote Access IP addresses. |
| 718 |
|
PPP timeout. |
| 719 |
|
PPP terminated by
remote machine. |
| 720 |
|
No PPP control
protocols configured. |
| 721 |
|
Remote PPP peer is not
responding. |
| 722 |
|
The PPP packet is
invalid. |
| 723 |
|
The phone number,
including prefix and suffix, is too long. |
| 724 |
|
The IPX protocol
cannot dial-out on the port because the computer is an IPX
router. |
| 725 |
|
The IPX protocol
cannot dial-in on the port because the IPX router is not
installed.. |
| 726 |
|
The IPX protocol
cannot be used for dial-out on more than one port at a time. |
| 727 |
|
Cannot access
TCPCFG.DLL. |
| 728 |
|
Cannot find an IP
adapter bound to Remote Access. |
| 729 |
|
SLIP cannot be used
unless the IP protocol is installed. |
| 730 |
|
Computer registration
is not complete. |
| 731 |
|
The protocol is not
configured. |
| 732 |
|
The PPP negotiation is
not converging. |
| 733 |
|
The PPP control
protocol for this network protocol is not available on the
server. |
| 734 |
|
The PPP link control
protocol terminated. |
| 735 |
|
The requested address
was rejected by the server.. |
| 736 |
|
The remote computer
terminated the control protocol. |
| 737 |
|
Loopback detected. |
| 738 |
|
The server did not
assign an address. |
| 739 |
|
The remote server
cannot use the Windows NT encrypted password. |
| 740 |
|
The TAPI devices
configured for Remote Access failed to initialize or were not
installed correctly. |
| 741 |
|
The local computer
does not support encryption. |
| 742 |
|
The remote server does
not support encryption. |
| 743 |
|
The remote server
requires encryption. |
| 744 |
|
Cannot use the IPX net
number assigned by the remote server. Check the event log. |
| 745 |
|
An essential file is
missing |
| 752 |
|
A syntax error was
encountered while processing a script. |
